What happens when Shantui bulldozer transmission fails?

The main faults of the transmission of Shantui bulldozers are that the oil temperature is too high, it is difficult to shift gears and automatically disengage, and there is a knocking sound. Too high oil temperature is usually caused by low oil level in the transmission, poor lubrication, sometimes excessive load or too tight bearing installation. You should check whether the oil level is suitable, whether the local temperature of the bearing parts is too high, and adjust the bearing clearance; it is not easy to shift gears and Automatic disengagement is often caused by gear tooth surface peeling or spline wear and grooves, difficulty in gear movement, excessive clearance, worn positioning pins, too weak spring elasticity, incomplete gear meshing during shifting, incorrect adjustment of the shaft lock lever, etc. , you should check whether the distance between the locking levers is appropriate, and replace it with new parts when the spring force is insufficient; knocking sounds are mostly caused by tooth surface wear, excessive gaps between teeth, or loose splines, etc. All parts should be inspected according to technical requirements. The wear condition and the area of the meshing surface will make the sound uniform in the transmission after reinstallation.

Bulldozer
Heavy Loaders Rated Capacity,Heavy Machinery Rock Bulldozer,Hydraulic Controlled Bulldozer,Coal Bulldozer
220hp shantui bulldozer ,160hp shantui dozer ,logging bulldozer shantui ,SD22bulldozer ,SD32 DOZER
Bulldozer Spare Parts
Bulldozer Spare Parts,Bulldozer Track Shoe,Hydraulic Servo Valve Assy,Hydraulic Pump